Satel INTEGRA Plus Specifications download pdf (Page 74)

72 Programming SATEL

For the pulse, A

DEMCO

XPRESS

, C

ONTACT

(

SELECTED

) or SIA

(

SELECTED

) formats, you must

define which events will be sent with the given identifier (see: section I

DENTIFIERS

ASSIGNMENT

For the C

ONTACT

(

FULL

) or SIA

(

FULL

) formats, each object has its own identifier.

Therefore, the identifiers of non-existing objects need not to be programmed. In the

system event identifier field, you should re-enter the identifier of the object which is

responsible for the system (for example, the object, where the control panel is

installed).

SIA / TELIM prefix

2 characters which will precede each of the identifiers in case of the SIA and TELIM formats.

Thus an identifier consisting of 6 characters can be obtained. 2 hexadecimal characters

(digits or letters from A to F) can be programmed. Entering 00 means that the prefix will not

be added. Using the digit 0 in the prefix is not recommended.

Events assignment

If the events are to be sent to both stations (S

TATION

AND

is selected), you can define

which event types will be reported to the given station.

It is not possible to assign events for the C

ONTACT

(

FULL

) and SIA

(

FULL

) formats.

9.1.4 SIA-IP

If events are to be sent in the SIA-IP format, you must program additional parameters for

each monitoring station.

Send MAC address [MAC] – if this option is enabled, the MAC address of ETHM-1 or GSM

module will be sent with event code.

Send timestamp [Timestamp] – if this option is enabled, the date and time will be sent with

event code.

Encrypt data [Coded] – if this option is enabled, the data to be sent will be encrypted, and

the date and time will be sent with event code.

SIA-IP key – the key to encrypt data to be sent to the monitoring station using the SIA-IP

format (a string of up to 16 alphanumeric characters).

Supervision interval [SIA-IP test] – an additional transmission can be sent at specified

intervals to check communication with the monitoring station. You can program a number

of days, hours, minutes and seconds between the transmissions.

9.1.5 Identifiers assignment

Define the identifier with which events relating to individual partitions, zones, keypads and

expansion modules will be sent. If no identifier is assigned to the given element of the

system, it will be impossible to define codes for events relating to it.

9.1.6 Event codes

For the pulse and Ademco Express formats, it is necessary to program codes which will be

reported to the monitoring station if the defined events occur. The reported events are those

for which a code different from "00" has been programmed. 2 hexadecimal characters (digits

or letters from A to F) are to be programmed.

In case of the C

ONTACT

(

SELECTED

) and SIA

(

SELECTED

)

formats, indicate the events

which are to be reported, entering for them any code different from "00" (a code

consistent with the format specification will be sent, not the entered one). The events

for which the "00" code has been programmed will not be reported.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 80 81 82

Comments to this Manuals

No comments

Satel INTEGRA Plus Specifications Page 74

Comments to this Manuals

Related products and manuals for Security access control systems Satel INTEGRA Plus