Satel INTEGRA Plus Specifications download pdf (Page 65)

SATEL INTEGRA Plus 63

6. Programming the keypads

You can program the keypads:

 using the keypad, in the service mode, by means of the functions available in the LCD

EYPADS

submenu (S

TRUCTURE

H

ARDWARE

LCD K

EYPADS

) – having selected the

ETTINGS

or N

AMES

function, choose the keypad;

 using the D

LOAD

X program, in the "Structure" window, "Hardware" tab, after clicking on the

keypad name.

6.1 Keypad parameters and options

Shown in the square brackets are the names, as used in the keypads.

Name – individual name of the LCD keypad (up to 16 characters).

Partitions managed by keypad [Partitions] – partitions which can be armed/disarmed or

alarm in which may be cancelled from the keypad. These functions are available to the

users having appropriate rights and access to these partitions.

Using the service code you can operate all partitions, irrespective of which partitions

are operated by the keypad.

Show alarms of partitions [Alarms] – the keypad can signal burglary alarms from selected

partitions.

Show fire alarms of partitions [Fire alarms] – the keypad can signal fire alarms from

selected partitions.

CHIME signal of zones [Chime zones] – the keypad can audibly signal violation of selected

zones. If the zone is armed, violation will not trigger the CHIME signal.

In the case of the INTEGRA 256 Plus control panel, violation of zone numbers 129 to

256 will be indicated by the INT-KLFR / INT-TSG / INT-TSI keypads and the keypads

with firmware version:

 INT-KLCD / INT-KLCDR – 1.12 (or newer);

 INT-KLCDK / INT-KLCDL / INT-KLCDS – 6.12 (or newer);

 INT-KSG – 2.00 (or newer).

Zone disabling CHIME [Chime bps. zone] – zone, which, if violated, will disable the CHIME

feature for specified time.

The zone 256 cannot disable the CHIME feature.

Bypass time [Chime bps. time] – time during which the CHIME signal will be disabled after

violation of the zone which disables the signaling (time is counted from the zone restore). If

the value 0 is programmed, the signaling will not be disabled.

Quick Arm partitions [Quick Arm] – partitions which will be armed in case of the quick

arming (see: U

SER MANUAL

Show entry delay of partitions [Entry time p.] – the partitions for which counting the entry

delay will be indicated by text appearing on the LCD display.

Show exit delay of partitions [Exit time p.] – the partitions for which counting the exit delay

will be indicated by text appearing on the LCD display.

Date/Time format – the format in which the date and time are to be displayed on the keypad.

LCD backlight – selection of the display backlighting type.

Keys backlight – selection of the keypad backlighting type.

Alarm messages – you can define whether the keypad is to display text messages about

alarms:

– in partitions [Part.al.msg.];

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 81 82

Comments to this Manuals

No comments

Satel INTEGRA Plus Specifications Page 65

Comments to this Manuals

Related products and manuals for Security access control systems Satel INTEGRA Plus