Satel INTEGRA Plus Specifications Page 51
- Page / 82
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
SATEL INTEGRA Plus 49
The pulse duration is approx. 0.3 seconds.
24. MONO
S
WITCH
– controlled by users, zones or timers. Using a code, zone violation or
turning timer on will activate the output for a preprogrammed time.
25. BI
S
WITCH
– controlled by users, zones or timers. Depending on the current status, using
a code or violating a zone will activate/deactivate the output. Turning the timer ON
activates the output, and turning the timer OFF deactivates the output.
If the 24. MONO
S
WITCH
or 25. BI
S
WITCH
type output is to be controlled from the
keypad, it must be assigned to a group of outputs (see: section O
UTPUT GROUPS
p. 54).
26. T
IMER
– the output controlled by timers.
27. T
ROUBLE STATUS
– indicates the troubles.
28. AC
LOSS
(
MAINBOARD
)
–
IMMEDIATE
– indicates the loss of AC power to the control panel
mainboard.
29. AC
LOSS
(
TECHNICAL ZONE
) – indicates the violations of 59. T
ECHNICAL
-AC
LOSS
type
zones.
30. AC
LOSS
(
EXPANSION MODULE
) – indicates the loss of AC power to the modules with power
supply.
31. B
ATTERY TROUBLE
(
MAINBOARD
) – indicates the low battery of the control panel mainboard.
32. B
ATTERY TROUBLE
(
TECHNICAL ZONE
) – indicates the violations of 60. T
ECHNICAL
-B
ATTERY
LOW
type zones.
33. B
ATTERY TROUBLE
(
EXPANSION MODULE
) – indicates the low battery of the modules with
power supply.
34. D
ETECTOR TROUBLE
– indicates the zone troubles.
35. T
ELEPHONE LINE IN USE STATUS
– indicates that the telephone communication is in use.
36. G
ROUND
S
TART
– generates a control pulse necessary for work with some types of
telephone exchange.
37. R
EPORTING ACKNOWLEDGEMENT
– indicates the acknowledgement of reporting.
38. S
ERVICE MODE STATUS
– indicates that the service mode is entered.
39. T
EST VIBRATION DETECTORS
– intended for testing the vibration detectors in one partition
(see: 10. 24
H
V
IBRATION
zone type). The output cut-off time defines the duration of testing
the vibration detectors in the selected partition.
40. C
ASH MACHINE BYPASS STATUS
– indicates bypassing the 11. 24
H
C
ASH MACHINE
type
zones in partitions with cash dispenser.
41. P
OWER SUPPLY
– intended for supplying external devices.
42. P
OWER SUPPLY ON ARMED
– dedicated to powering the detectors which should not be
active when the system is disarmed. Gets active when the arming procedure is started
(active during the exit delay countdown).
43. R
ESETABLE POWER SUPPLY
– the power supply output with optional reset by the user. The
programmed cut-off time is the time during which the output will be turned off.
44. F
IRE DETECTORS POWER SUPPLY
– intended for supplying the fire detectors with automatic
alarm verification. Violating the fire zone will turn the power off (for the time programmed
as the output cut-off time) and if another violation occurs after the power is turned on
again, the fire alarm will be triggered. The output can be reset by the user.
45. P
ARTITION BLOCK STATUS
– indicates a temporary blocking of the partition armed status. If
the output cut-off time is different from 0, the output will signal that the partition blocking is
ending (the output will turn on for a programmed time before the blocking ends).
46. O
UTPUTS LOGICAL
AND – active when all the control outputs with normal polarity are
active and all the control outputs with reversed polarity are inactive (because of the
- PROGRAMMING 1
- 2 Programming SATEL 4
- SATEL INTEGRA Plus 3 5
- 1. General 6
- 2. Programming options 6
- 2.1.5 Service mode menu 7
- 6 Programming SATEL 8
- SATEL INTEGRA Plus 7 9
- 8 Programming SATEL 10
- SATEL INTEGRA Plus 9 11
- [n – counter number] 11
- SATEL INTEGRA Plus 11 13
- [n – identifier number] 13
- 12 Programming SATEL 14
- SATEL INTEGRA Plus 13 15
- 14 Programming SATEL 16
- SATEL INTEGRA Plus 15 17
- 16 Programming SATEL 18
- SATEL INTEGRA Plus 17 19
- (only INT-S and INT-SK) 19
- (only INT-SCR) 19
- [n – number of output] 19
- 18 Programming SATEL 20
- SATEL INTEGRA Plus 19 21
- (does not apply to CA-64 DR) 21
- 20 Programming SATEL 22
- SATEL INTEGRA Plus 21 23
- 22 Programming SATEL 24
- 2.2 DLOADX program 25
- 24 Programming SATEL 26
- SATEL INTEGRA Plus 25 27
- 26 Programming SATEL 28
- program 29
- 28 Programming SATEL 30
- SATEL INTEGRA Plus 29 31
- LOADX program 32
- Configuring the GSM module 33
- Initiating a connection 33
- 3. System structure 34
- 3.2.3 Partition parameters 35
- Partition type 36
- Options 37
- 3.3 Zones 38
- 3.3.3 Programming the zones 39
- 3.3.4 Zone parameters 39
- 38 Programming SATEL 40
- SATEL INTEGRA Plus 39 41
- 3.3.5 Zone types 42
- SATEL INTEGRA Plus 41 43
- 3.3.6 Zone options 44
- SATEL INTEGRA Plus 43 45
- 44 Programming SATEL 46
- 3.3.7 Counters 47
- 3.3.8 Bypasses 47
- 4. Outputs 48
- 4.1 Output parameters 49
- 4.2 Output functions 49
- 48 Programming SATEL 50
- SATEL INTEGRA Plus 49 51
- 50 Programming SATEL 52
- SATEL INTEGRA Plus 51 53
- 4.3 Options 54
- 4.4 Output triggering 54
- 4.6 Output disabling 55
- 4.8 Output groups 56
- 4.9 Output state indicating 57
- 4.11 Output testing 57
- 5. System options 58
- 5.2 Printer options 59
- 5.3 Other options 60
- SATEL INTEGRA Plus 59 61
- 4 Arming options 62
- Times 5.5 63
- 5. r parameters 63
- 62 Programming SATEL 64
- 6. Programming the keypads 65
- 64 Programming SATEL 66
- SATEL INTEGRA Plus 65 67
- 66 Programming SATEL 68
- 7. Timers 69
- 8. User schedules 70
- 9. Reporting 70
- SATEL INTEGRA Plus 69 71
- 9.1.2 Advanced options 72
- Identifiers 73
- SIA / TELIM prefix 74
- Events assignment 74
- 9.1.4 SIA-IP 74
- 9.1.6 Event codes 74
- 9.2 Starting the reporting 75
- 9.2.3 GPRS reporting 76
- 10. Messaging 77
- 76 Programming SATEL 78
- 10.2.1 Events assignment 79
- 78 Programming SATEL 80
- SATEL INTEGRA Plus 79 81
- 13. Manual update history 82
Related products and manuals for Security access control systems Satel INTEGRA Plus
(27 pages)© 2020, manymanuals.com. All rights reserved. | 2.240 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals