Satel INTEGRA Plus Specifications download pdf (Page 73)

SATEL INTEGRA Plus 71

Reporting format [Tel. 1 format] – format in which event codes are sent to the monitoring

station to the basic telephone number or via Ethernet and using the GPRS technology.

Backup format [Tel. 2 format] – format in which event codes are sent to the backup

telephone number of the monitoring station.

Having selected the C

ONTACT

(

FULL

) or SIA

(

FULL

) format you do not need to

program the assignment of identifiers and any event codes. The control panel will send

the codes according to the format specification and the performed subdivision into

objects.

Repetitions [Repetition count] – the number of attempts to establish telephone connection

with the monitoring station after which, if there is no connection (busy number, no

answer from the station, etc.), the control panel will suspend reporting. Up to 31 retries

can be programmed. Programming the value 0 means that monitoring will be suspended

after 8 attempts.

Suspend time – the time for which telephone reporting is suspended, after making the

programmed number of attempts to establish connection with the monitoring station. The

control panel will resume the attempt of establishing telephone connection with the

monitoring station after this time expires or a next, new event occurs. Up to 30 minutes

can be programmed. Programming the value 0 means that an attempt to establish

telephone connection with the monitoring station will only be taken after occurrence of a

new event in the system

Server [IP address] – the address of STAM-2 monitoring station (or SMET-256 converter). It

can be entered in the form of IP address (4 decimal numbers separated by dots) or as a

name.

Port – the number of port through which communication with the monitoring station will be

effected.

IP format – events can be sent using the SATEL or SIA-IP format (SIA DC-09 standard). The

SIA-IP format can be used for transmission over Ethernet, if an ETHM-1 module with

firmware version 1.06 or newer is connected to the control panel.

Protocol – the TCP or UDP protocol can be used for communication.

Station key [Key (MS)] – the key with which the data sent to the monitoring station will be

encrypted (a string of up to 12 alphanumeric characters). The parameter applies to the IP

SATEL format.

ETHM key [Key (ETHM)] – the string of up to 5 alphanumeric characters intended to identify

the control panel for the purposes of reporting via Ethernet. The parameter applies to the

IP SATEL format.

GPRS key [Key (GPRS)] – the string of up to 5 alphanumeric characters intended to identify

the control panel for the purposes of reporting using the GPRS technology. The parameter

applies to the IP SATEL format.

It is recommended that the maximum number of characters be programmed for the

keys and that letters, digits and special characters be used, as this will ensure higher

security of the transmission.

Identifiers

Each event code is sent to the monitoring station with an identifier. Up to 8 identifiers plus a

system identifier can be programmed. Sent with the system identifier are events related to

the alarm system (troubles, tests, etc.).

4 characters (digits or letters from A to F) must be programmed for each identifier. Using the

digit 0 in the identifier is not recommended.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 81 82

Comments to this Manuals

No comments

Satel INTEGRA Plus Specifications Page 73

Comments to this Manuals

Related products and manuals for Security access control systems Satel INTEGRA Plus