Satel INTEGRA Plus Specifications download pdf (Page 55)

SATEL INTEGRA Plus 53

Partitions – indicate the partitions/partition keypads. The output will be controlled by events

related to these partitions/partition keypads.

Timers – indicate the timers which will control the output.

Master users / users – indicate the masters/users. The output will be controlled by events

related to these masters/users.

Outputs – indicate the output. The output will be controlled by events related to these

outputs.

Expanders – indicate the expanders. The output will be controlled by events related to these

expanders.

Troubles – indicate the troubles. The output will be activated by occurrence of these

troubles.

Voice mess. – indicate the synthesizers. The output will be active when the voice messages

with indicated numbers are played back.

Remote switches – indicate the remote switches. The users will control the output by

controlling the selected switches via the telephone.

Burglary zones in partition – indicate the partition in which the output will be activated by

starting the test of burglary zones.

Fire/technical zones in partition – indicate the partition in which the output will be activated

by starting the test of fire or technical zones.

Arm mode – indicate the arm mode whose activation will activate the output.

Telephone usage type – indicate which cases of using the telephone communication by the

alarm control panel will activate the output.

4.5 Clearing alarm in partitions

Indicate the partitions in which alarm clearing will be available (the users having access to

these partitions will be able to clear the alarm).

The alarm must be signaled in the partition where it is to be cleared. If no alarm is

being signaled by the given partition, it will be impossible to clear it.

4.6 Output disabling

Disabling timers – for the 105. S

HUTTER UP

and 106. S

HUTTER DOWN

type outputs, you can

indicate the timers which will block the output. When the timer is active, it is not possible to

control the output.

Partitions – for the 11. C

HIME

type output, you can indicate the partitions from which the user

will be able to block the output using the O

UTPUTS CHIME

function.

4.7 120. Thermostat output parameters

Temperature detector – indicate the zones to which the ATD-100 detectors are assigned.

Temperature T1 – the first temperature threshold. It is active when all control timers are OFF

or the forcing output is active. If the temperature threshold is active, the output will be

turned on if the temperature drops below the threshold.

Temperature T2 – the second temperature threshold. It is active when the control timer is

ON or the forcing output is inactive. If the temperature threshold is active, the output will be

turned on if the temperature drops below the threshold.

The user can edit the temperature thresholds using the T

EMPERATURES

user function

available in the C

HANGE OPTIONS

submenu.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 81 82

Comments to this Manuals

No comments

Satel INTEGRA Plus Specifications Page 55

Comments to this Manuals

Related products and manuals for Security access control systems Satel INTEGRA Plus