Satel INTEGRA Plus Specifications download pdf (Page 58)

56 Programming SATEL

5. System options

Most of the options and parameters described in this section can be programmed:

 using the keypad, in the service mode, by means of the functions available in the O

PTIONS

submenu;

 using the D

LOAD

X program, in the "Options" window.

Shown in square brackets are the names used in keypads.

5.1 Telephone options

Reporting - TELEPHONE [Mon.TELEPHONE] – with this option enabled, the control panel

can send event codes by means of the telephone line.

Reporting - GPRS [Mon.GPRS] – with this option enabled, the control panel can send event

codes using GPRS technology (the SATEL GSM module must be connected to the control

panel). This does not apply to the TELIM format.

Reporting - ETHM [Mon.ETHM-1] – with this option enabled, the control panel will be able to

send event codes to the monitoring station via the Ethernet network (the SATEL ETHM-1

module must be connected to the control panel). This does not apply to the TELIM format.

Telephone messaging [Messaging] – if this option is enabled, the control panel can send

notifications via the telephone network of the occurrence of specific events using voice or

text messages defined by the installer.

SMS messaging – if this option is enabled, the control panel can send notifications of the

occurrence of specific events using SMS messages, the content of which is consistent with

event description in the event log (the SATEL GSM module must be connected to the

control panel).

Answering - modem [Modem answer.] – with this option enabled, external initiation of the

communication between modem and control panel is possible.

Answering - audio [Voice answer.] – with this option enabled, the control panel will carry out

the function of call answering.

The A

NSWERING

AUDIO

option must be enabled, if the users are to operate the alarm

system using the interactive voice menu offered by the INT-VG module.

Remote control – with this option enabled, the control panel allows the users having

a telephone code to operate the R

EMOTE SWITCH

outputs by using a phone. The option is

available if the A

NSWERING

–

AUDIO

is enabled.

External modem [External modem] – with this option enabled, the control panel will support

an external modem connected to the control panel RS-232 port.

Modem ISDN/GSM/ETHM [ISDN/GSM modem] – enable this option if the GSM, ISDN or

ETHM-1 module is connected as the external modem. The option is available if the

XTERNAL MODEM

option has been enabled.

Answering - ETHM/GSM [Ext.mod.answ.] – if this option is enabled, it is possible to initiate

communication with the control panel from the outside, by means of the ETHM-1 module,

GSM or ISDN modem. The option is available, if the E

XTERNAL MODEM

and

ODEM

ISDN/GSM/ETHM options are enabled. The option is not available when the A

NSWERING

MODEM

option is enabled, which also enables communication with the control panel to be

initiated from the outside, by means of the ETHM-1 module, GSM or ISDN modem.

Tone dialing – with this option enabled, the control panel will tone dial the telephone

numbers (pulse dial, if this option is disabled).

Ground Start – with this option enabled, the control panel will use the Ground Start method

to obtain signal on the telephone line (by grounding temporarily the telephone line wires).

Enable this option, if required by your phone service provider.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 81 82

Comments to this Manuals

No comments

Satel INTEGRA Plus Specifications Page 58

Comments to this Manuals

Related products and manuals for Security access control systems Satel INTEGRA Plus