Satel INTEGRA Plus Specifications download pdf (Page 63)

SATEL INTEGRA Plus 61

Times 5.5

Globa s, for which the

programmed E

NTRY DELAY

is equal to 0.

ime – time of signaling alarm in keypads, proximity card arm/disarm devices,

programmed the value 0

l entry delay – parameter taken into account in the delayed zone

Global alarm t

proximity card readers and DALLAS chip readers.

No armed indication after – time counted from the moment of partition arming, during which

information about armed status is displayed on the keypads.

Default partition block time – the time period during which the W

ITH TEMPORARY BLOCK

type

partitions with enabled D option w

EFAULT BLOCK TIME

ill be blocked.

AC loss report delay – time during which the control panel must not receive AC power so

that information of it can be saved to the event log. Having

means that the information of AC power loss will not be saved to the event log.

uring which abnormal vTelephone line loss report delay – time d oltage must be on the

telephone line for the control panel to report the telephone line trouble. A delay in reporting

the trouble prevents sending information about short-time voltage dips (e.g. during a

phone call) or decays.

6 Service options and parameters

In the keypad the options are available in SM

SETTINGS

Disable service mode [Block SM] – with this option enabled, entering the service mode

ssible (entering the service mode "from pins"

5. r parameters

submenu.

"from pins" (by hardware means) will be impo

will only be possible if the control panel factory settings are restored).

Disable downloading [Block DWNL] – with t n enabled, shis optio tarting communication with

the D

LOAD

X program "from pins" will be impossible.

de service mode after [Hide SM after] – the time counted from the last operation

performed in the service menu, after expiry of which the service mode menu will be hidden

(see: p. 5). If value 0 is programmed, the automatic hiding of the service mode will be

disabled.

Service mode beep [SM sounds] – with this option enabled, the service mode will be

acoustically signaled in the keypad.

7 Othe

Ri r] – number of rings after which the control panel will

code length] – the minimum required number of digits in the

ory values.

ngs before answer [Rings to answe

go off hook.

User code min. length [Min.

user code. The parameter will be taken into account when creating and editing the codes

(but it has no effect on the codes already existing in the system).

efix length –Pr the required number of digits in the prefix. Entering a number different from 0

means that from now each code will have to be preceded by a prefix:

– normal – for everyday use. By default, it consists of a suitable number of digits 0 (e.g. if

the prefix length has been set at 4, the default prefix will be: 0000);

– DURESS – to be used, when the user is forced to enter the code. If used, a silent alarm

will be triggered. By default, it consists of a suitable number of digits 4 (e.g. if the prefix

length has been set at 3, the default prefix will be: 444).

e prefixes and their validity can be programmed by the administratoTh r (master), using the

HANGE PREFIX

function.

Each change of the prefix length restores the prefix fact

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 81 82

Comments to this Manuals

No comments

Satel INTEGRA Plus Specifications Page 63

Comments to this Manuals

Related products and manuals for Security access control systems Satel INTEGRA Plus