Satel INTEGRA Plus User Manual download pdf (Page 32)

30 User Manual SATEL

5.10 Zone bypassing

You can bypass / unbypass zones in the disarmed partitions. Violating a bypassed zone will

not trigger any alarm. Bypassing the zones is useful in case of damage or failure of the

detector connected to the zone, which results in malfunctioning of the alarm system (e.g.

triggering false alarms).

Zone bypassing reduces the level of protection. Prior to arming, make sure that there

are no accidentally bypassed zones in the partition, which might allow an intruder to

get access to the protected area despite arming.

If a zone is bypassed, call in the installer (service technician) immediately to repair the

defect.

For security considerations, the installer may reduce the number of zones that the user

will be allowed to bypass.

5.10.1 Zone inhibiting

The zones can be inhibited by the users having the ZONES BYPASSING right. The inhibited

zone will be bypassed until the partition to which the zone belongs is disarmed, or until the

zone is unbypassed by the user.

1. Enter the code and confirm with the

key

2. Press in turn the 4 and 1 keys. The list of zones will be displayed. There is an additional

symbol in the upper right-hand corner of the display to inform you about the given zone

status:

– the zone is not bypassed;

– the zone is inhibited;

– the zone is isolated.

3. Using the  and  keys, find in the list the zone which is to be inhibited.

4. Press any digit key until the symbol appears in the upper right-hand corner of the

display.

5. Repeat the steps 3 and 4 for the next zones which are to be inhibited.

6. Press the

key

. A message will inform you that the zones are inhibited.

Having started the INHIBIT function (step 2), you can press the  or  key to switch

over the keypad to the graphic programming mode (see: section SELECTION FROM THE

MULTIPLE-CHOICE LIST p. 15).

5.10.2 Zone isolating

The zones can be isolated by the users having the ZONES BYPASSING and ZONE ISOLATION

rights. The isolated zone will remain bypassed until unbypassed by the user.

1. Enter the code and confirm with the

key

2. Press in turn the 4 and 2 keys. The list of zones will be displayed. There is an additional

symbol in the upper right-hand corner of the display to inform you about the given zone

status:

– the zone is not bypassed;

– the zone is inhibited;

– the zone is isolated.

3. Using the  and  keys, find in the list the zone which is to be isolated.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

Comments to this Manuals

No comments

Satel INTEGRA Plus User Manual Page 32

Comments to this Manuals

Related products and manuals for Security access control systems Satel INTEGRA Plus