Satel INTEGRA Plus User Manual download pdf (Page 21)

SATEL INTEGRA Plus 19

Permanent service access – the option is available to the master user (administrator). If

enabled, the installer has permanent access to the alarm system, which, among other

things, enables the control panel to be programmed by using LCD keypad or DLOADX

program.

Enabling PERMANENT SERVICE ACCESS option will clear the installer access time

programmed with the SERVICE ACCESS function. On the other hand, programming the

installer access time will disable the PERMANENT SERVICE ACCESS option.

Service can edit – the option is available to the master user (administrator). If it is

enabled, the installer can add, edit and delete users in the administrator's object.

Service arm/disarm/clear/bypass – the option is available to the master user

(administrator). If it is enabled, the installer can arm/disarm the system, clear alarms

and bypass zones in the administrator object.

Permanent DLOADX access – the option is available to the master user (administrator). If

it is enabled, the control panel can be programmed by means of the DLOADX program,

irrespective of whether or not the installer has access to the alarm system.

DloadX IP – enables programming the address of the computer, on which the DLOADX

program is installed. The address must be set if the control panel is to initiate

communication with the DLOADX program through Ethernet, using the TCP/IP protocols

(see: description of the ETHM-1 – DLOADX function, available in the DOWNLOADING

submenu). It can be entered as a name or IP address.

GuardX IP – enables programming the address of the computer, on which the GUARDX

program is installed. The address must be set if the control panel is to initiate

communication with the GUARDX program through Ethernet, using the TCP/IP protocols

(see: description of the ETHM-1 – GUARDX function, available in the DOWNLOADING

submenu). It can be entered as a name or IP address.

Erase service message – allows the user to delete the service message.

Tests – the following functions are available in the submenu:

Partitions – allows to check the status of partitions accessible to the user and operated

from the keypad. The partition status is presented by means of a symbol. The numbers

placed on the glass allow you to identify the partition numbers. By factory default, the

partition status is shown using the following symbols (which can be changed by the

installer):

b - temporary partition blocking,

? - entry delay,

E - exit delay (less than 10 seconds),

e - exit delay (more than 10 seconds),

P - fire alarm,

A - alarm,

p - fire alarm memory,

a - alarm memory,

a - zone is armed,

- violated zones,

- zone is disarmed, zones OK.

Zones – allows to check the status of zones in the partitions accessible to the user and

operated from the keypad. The zone status is presented by means of a symbol. The

numbers placed on the glass allow you to identify the zone numbers. On starting the

function, the status of zones 1-32 is displayed. Use the  and  keys to display the

status of other zones (see also description of the

LEDs, p. 8). By factory default, the

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 47 48

Comments to this Manuals

No comments

Satel INTEGRA Plus User Manual Page 21

Comments to this Manuals

Related products and manuals for Security access control systems Satel INTEGRA Plus