SATEL INTEGRA Plus 25
Blocking time – parameter for the BLOCKING PARTITION type code (see: section USER TYPES
p. 26).
Rights – define which functions can be used by the user. The following rights (permissions)
are available:
– Arming
– Disarming
– Disarm, when other user arm [Can alw.disarm] – if the user does not have this right,
he/she can only disarm the system if it was armed by him/her
– Partition alarm clearing [Alarm clearing]
– Object alarm clearing [Object al.clr.]
– Other objects alarm clearing [Other al.clr.]
– Telephone messaging canceling [V.msg.clearing]
– Auto-arming defer [Arm deferring]
– First code for two codes partition [Enter.1st code]
– Second code for two codes partition [Enter.2nd code]
– Access temporary blocked partitions [Block p.access]
– Change access code [Code changing]
– Users editing
– Zones bypassing [Zones inhibit]
– Zone isolation [Zones isolate]
– Clock setting
– Trouble state checking [Troubles view.]
– Event log reviewing [Events viewing]
– Detectors resetting [Zones resett.]
– Options programming [Options chang.]
– Access to menu TEST [Tests]
– Downloading starting [Downloading]
– Access to BI & MONO outputs [Outs control]
– System state review in G
UARDX [GuardX using]
– Resetting outputs [Clr.latch.outs]
– Simple user – having entered the code, confirmed with the
key, the user never
selects the partitions which are to be armed / disarmed. All partitions the user has
access will be armed / disarmed.
– Administrator – the user has access to the menu functions which are reserved for the
administrator
Keypads etc. – additional modules from which the user will be able to operate the system
(proximity card arm/disarm devices, partition keypads, code locks, reader expanders).
Proximity cards / DALLAS chips – if the proximity card / DALLAS iButton reader is used in
the system, a proximity card / DALLAS iButton can be assigned to the user, which will
allow the user to operate the system by means of readers.
Keyfobs – in case of the control panel to which a module with keyfob support is connected
(ACU-100, ACU-250, INT-RX or INT-RX-S), a keyfob can be assigned to the user, which
will allow to operate the system remotely. The user may have up to 2 keyfobs: the
APT-100 (supported by the ABAX system) and the 433 MHz (supported by the INT-RX or
INT-RX-S modules).
Comments to this Manuals