Satel INTEGRA Plus User Manual download pdf (Page 26)

24 User Manual SATEL

5.6 Two-code arming / disarming

If the partition is to be armed / disarmed with 2 codes, the user entering the first code must:

1. Enter the code and confirm with the

key

2. Scroll through the menu using the  key until the ARM (2 CODES) / DISARM (2CODES)

function is found.

3. Press the

key

. Proceed in the same way as for the full arming of selected partitions

(steps 3-7).

4. If the installer has not set the code validity at 30 seconds, specify the code validity and

confirm with the key.

Prior to expiration of the code validity, the user entering the second code must arm / disarm

the partition using the:

 LCD keypad (see: section ARMING or DISARMING AND ALARM CLEARING);

 partition keypad ([code] );

 reader (read-in of proximity card or DALLAS iButton).

The installer can configure the alarm system so that the second code will have to be

entered on another LCD keypad, partition keypad, etc.

5.7 Triggering the alarm from keypad

The installer can permit triggering alarms from the keypad. To trigger an alarm, do the

following:

fire alarm – press the key for approx. 3 seconds;

medical (auxiliary) alarm – press the key for approx. 3 seconds;

panic alarm – press the key for approx. 3 seconds. The installer defines whether the loud

panic alarm (setting off the loud alarm signal) or the silent panic alarm (without the loud

signal) will be triggered.

5.8 Users

The users can be added, edited and removed by:

 master user (administrator);

 installer (if the SERV. CAN EDIT option is enabled by the administrator);

 user (if granted the U

SERS EDITING right).

The following data can be defined for the user:

Code – a sequence of digits for authorization of the user when using keypads and code

locks. The control panel supports codes consisting of 4 to 8 characters, however the

installer can define the minimum length of the code.

Telephone code – a sequence of digits for authorization of the user when using the

functions of telephone call answering and telephone control (see: section C

ALL ANSWERING

AND TELEPHONE CONTROL

p. 42).

Partitions – partitions to which the user has access (i.e. he is authorized to arm or disarm

them, clear alarms etc.).

Type – see: section U

SER TYPES p. 26.

User schedule – parameter for the SCHEDULED type code (see: section USER TYPES p. 26).

Validity time – parameter for the RENEWABLE, TEMPORARY or SCHEMATIC type codes (see:

section USER TYPES p. 26).

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 47 48

Comments to this Manuals

No comments

Satel INTEGRA Plus User Manual Page 26

Comments to this Manuals

Related products and manuals for Security access control systems Satel INTEGRA Plus