Satel INTEGRA Plus User Manual download pdf (Page 12)

10 User Manual SATEL

2 long beeps – invalid code/card, function not available or exiting the function without

confirmation of the data entered (e.g. by using the

key).

3 long beeps – unavailable function.

Events signaled by sounds

Only installer selected events are signaled.

Alarms are being signaled throughout the time programmed by the installer.

5 short beeps – zone violation (CHIME).

Long beep every 3 seconds, followed by a series of short beeps for 10 seconds

and 1 long beep – countdown of exit delay (if the time is shorter than 10 seconds, only

the final sequence of short beeps will be generated).

A sequence of 7 beeps of diminishing duration, repeated every few seconds –

countdown of auto-arming delay.

2 short beeps every seconds – countdown of entry delay.

2 short beeps every 3 seconds – signaling a new trouble.

Continuous beep – alarm.

Long beep every second – fire alarm.

5.2 [Code] – arming / disarming menu

Information given in the section below do not apply to users having the SIMPLE USER

right (see p. 25).

After you enter the code and confirm it with the

key

– a message on the need to change the code or a service note may be displayed;

– alarm will be cleared – if the user is authorized to clear the alarm and there is an alarm

in the system;

– one partition will be disarmed – if the user is authorized to disarm the partition, has

access to only one partition operated from the keypad and that partition is armed, or has

access to many partitions, but only one partition is armed;

– one partition will be armed – if the user is authorized to arm the partition, has access to

only one partition operated from the keypad and that partition is disarmed;

– the arming/disarming menu will be displayed.

5.2.1 Arming menu

The arming menu will be displayed if:

– the user is authorized to arm the partition;

– the user has access to a number of partitions operated from the keypad;

– none of the partitions accessible to the user is armed;

– there is no alarm.

Two functions are available in the menu:

Arm all arming all partitions

Arm selected

arming selected partitions

5.2.2 Disarming menu

The disarming menu will be displayed if:

– the user is authorized to disarm the partition;

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

Comments to this Manuals

No comments

Satel INTEGRA Plus User Manual Page 12

Comments to this Manuals

Related products and manuals for Security access control systems Satel INTEGRA Plus