Satel CA-10 User Manual download pdf (Page 6)

USER MANUAL CA-10

Operating Instructions

Operating of the alarm system consists basically in arming and disarming the system

and responding appropriately to the information the control panel may signal on the

keypad. The LED keypad conveys

information on the status of the alarm system

by means of several LEDs and audible

signals. The LCD keypad displays the

information about the status of the alarm

system by means of a two-line, backlit LCD

display (2x16 characters) and six additional

LED controls.

There are two types of LED keypads (CA-

10 KLED, CA-10 KLED-S) and three types of

LCD keypads (CA-10 KLCD, CA-10 KLCD-S,

CA-10 KLCD-L) that can be used together

with the CA-10 control panel. All of them fully

support the alarm system.

The CA-10 KLED keypads indicate

simultaneously the status of one partition and

up to 12 zones of the control panel, while the

other ones can indicate the status of 4

partitions and 16 zones. Figures show

examples of LED and LCD keypads.

The keypad is provided with 12 keys, designated according to the telephone standard,

and intended for entering data. The additional 4 arrow keys in the LCD keypad allow the

user to move through the MENU and to select functions.

The CA-10 KLED and CA-10 KLCD keypads are shown at the end of this manual.

KLCD

keypad

KLCD

S and CA

KLCD

L keypads differ each

other in the dimension and the size of display.

CA-10 KLED-S keypad

http://www.ealarm.com.my

1 2 3 4 5 6 7 8 9 10 11 ... 22 23

No comments

Satel CA-10 User Manual Page 6