Satel INTEGRA User Manual download pdf (Page 42)

User Manual INTEGRA 40

• The control panel is protected against any attempts to scan the code – after three

consecutive attempts to get access to the panel using wrong codes within one telephone

communication session, the function of answering the modem signals will be disabled for

30 minutes.

6.15 SMS CONTROL ONLY INTEGRA 128-WRL

The INTEGRA 128-WRL control panel makes available to the users the function of control by

SMS messages. Receiving by the control panel of a message containing appropriate

command may result in violation of a zone, launching of a selected function or sending

a return message with information on the system status. Several control commands may be

included in one SMS message. The contents of the messages and additional rules for using

them (case sensitivity, adding the telephone code to the body of sent SMS message, etc.)

shall be defined by the installer.

7. USER FUNCTIONS

7.1 MAIN MENU

Presented on the next few pages is menu of all the user functions. These functions are made

available by the control panel in LCD keypad on entering the service code, master code or

normal user code and pressing the [#] or [

] key. Some of the specified functions are only

accessible to a selected code type. All details concerning the particular functions are

described hereunder. Function descriptions are arranged in the order corresponding to that of

the menu available on entering the [CODE][

7.1.1 User function menu

Note: As the menu changes dynamically, depending on the programmed system parameters

and the user authority level, not all functions are visible to the user.

[USER CODE][#] (calling the functions arming / disarming)

Disarm all

Disarm selected

[select partitions]

Arm all

Arm selected

[select partitions]

[USER CODE][

] (calling the user functions)

The functions available after entering the service code have been highlighted with white text

against black background. Highlighted with a frame are functions available to the

administrators. All functions are described in detail further in this manual.

View clear. al. view cleared alarms from selected partition zones

System reset restore system after verified alarm

Disarm disarm selected partitions

Clear alarm clear alarm

Clear other al. clear alarm in other objects

Abort voice m.

cancel telephone messaging

Arm

arm selected partitions

Arm (2 codes) start two code arming

Disarm (2codes) start two code disarming

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 74 75

Comments to this Manuals

No comments

Satel INTEGRA User Manual Page 42

Comments to this Manuals