Satel INTEGRA Specifications download pdf (Page 33)

SATEL Installer Manual 31

− switch on the ARF-100 tester,

− insert the ASW-100 E/ASW-100 F wireless controller into 230 V socket,

− insert battery to the ASD-100 detectors,

− violate (open) the tamper contact in case of the other devices.

If the serial number of the device being added is different than that previously

entered, a suitable message will inform you about it. Press the [

] key and then start

the device adding procedure from the beginning.

5. The name and serial number of the new device will be displayed. Press the key 1 to

proceed to the next step of the procedure (or press another key to terminate the new

device adding procedure).

6. A list of system zones to which the device can be assigned will be displayed on the

screen. Select one of them, using the T and S keys to scroll through the list,

and press the [#] key (pressing the [

] key will terminate the new device adding

procedure). If the device takes up several zones in the system (e.g. AMD-101

magnetic detector, AVD-100 vibration and magnetic detector, ASP-105 and ASP-205

sirens or ACX-200 and ACX-201 expanders), additional zones (next consecutive

after the selected one) will be automatically assigned to it.

7. Expander identification will be performed automatically (a corresponding message

will inform you about it).

8. A suggested name for the zone/output assigned to the device will appear on the

display. The name is composed of the name and serial number of the device, but any

other name can be given to the zone/output. Confirm the name, using the [#] key,

or terminate the naming procedure by pressing the [

] key (in such a case, the

zone/output will be given a name composed of the name and serial number of the

device). If the device occupies several zones/outputs, the procedure is repeated for

each of them.

3.14.2 Removing wireless devices

3.14.2.1 DLOADX program

1. Open the STRUCTURE window, click your mouse on the HARDWARE TAB, and then on

the W

IRELESS SYSTEM BRANCH.

2. Click your mouse on the device you want to be deleted.

3. Click your mouse on the REMOVE DEVICE button. The Confirm window will open.

4. Click your mouse on the Yes button, to confirm your intention to remove the device.

The device will be removed.

Note: After removal of a wireless devices from the system, start the expander

identification function.

3.14.2.2 LCD keypad

1. Start the R

EMOVE DEVICE function (SERVICE MODE ÆSTRUCTURE ÆHARDWARE

ÆEXPANDERS ÆSETTINGS ÆABAX - MAINBOARD ÆREMOVE DEVICE).

2. Select in the list the device you want to be removed from the system and press [#].

3. According to the displayed instruction, press the key with number 1, to remove the

device. Removal of the device will be confirmed by the keypad by four short and one

long beeps.

Pressing any other key instead of the key [1] will bring you back to the selection list of

wireless devices.

4. Expander identification will be performed automatically (a corresponding message

will inform you about it).

1 2 ... 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments

Satel INTEGRA Specifications Page 33

Comments to this Manuals

Related products and manuals for Carbon monoxide (CO) detectors Satel INTEGRA