Satel INTEGRA Plus Specifications download pdf (Page 16)

14 ETHM-1 SATEL

6 Remote Programming and Operation of the Control Panel via

Ethernet Network

After three consecutive attempts to establish communication with the module using an

incorrect key, the module will not respond for about 20 minutes to any attempts to

establish communication from the given IP address.

For information regarding configuration of the control panel by means of the DLOADX program

via the Ethernet (TCP/IP) network, please refer to the control panel programming manuals.

6.1 GuardX program

Communication between the GUARDX program and the control panel through the ETHM-1

module can be established in two ways:

1. Initiating connection from the GUARDX program. This method enables establishing

a connection with the control panel from any location.

2. Initiating connection from the keypad (by the control panel). The alarm system can be

managed remotely from the specified location only, with the control panel user's

knowledge.

Communication between the control panel and the GUARDX program can be

established, if communication identifiers in the program and in the control panel are

identical (INTEGRA IDENTIFIER and GUARDX IDENTIFIER).

6.1.1 Configuring the ETHM-1 module

In the ETHM-1 module:

 program the key for data encryption during communication with the GUARDX program

(GUARDX/JAVA KEY);

 enable the GUARDX option, if the connection is to be initiated from the GUARDX program;

 program the address of the computer running the GUARDX program (GUARDX SERVER), if

the connection is to be initiated from the keypad (by the control panel);

 program the number of TCP port which will be used for communication with the GUARDX

program, if it is to be different than 7091.

6.1.2 Configuring the GUARDX program

Fig. 9. GUARDX program: startup window.

In the GUARDX program startup window (see Fig. 9), click on the "Configuration" button.

A window will open, in which, in the "TCP/IP" tab (see Fig. 10), you can program the

following:



TCP port number (identical to that programmed in the module for communication with the

UARDX program, except for the situation when communication is effected through

a network device at which redirection to another port takes place);

1 2 ... 11 12 13 14 15 16 17 18 19 20

No comments

Satel INTEGRA Plus Specifications Page 16