Satel INTEGRA Plus Specifications download pdf (Page 11)

SATEL ETHM-1 9

Encrypted integration [Coded integr.] – if this option is enabled, communication with other

systems is encrypted.

The integration encryption key can be programmed:

 keypad: using the INTEGRATE KEY function (SERVICE MODE OPTIONS INTEGRATE

KEY);

 DLOADX program: in the "Service" tab ("Options" window "Service" tab).

Port [Port (integr.)] – number of the TCP port used for integration. Values from 1 to 65535

can be entered. The value must be different from that entered for the other ports. By

default: 7094.

Wrong login

Log event [Fail. – event] – if this option is enabled, all unauthorized attempts to connect to

the module are written to the event log.

Alarm [Fail. – alarm] – if this option is enabled, any unauthorized attempt to connect to the

module will trigger the tamper alarm. The option is available, if the LOG EVENT option is

enabled.

5.2 Virtual keypad settings

During communication with the control panel through the ETHM-1 module, you can use

a virtual keypad to operate and program the alarm system. For the INTEGRA / INTEGRA

Plus control panel, settings of the virtual keypad are configurable. Parameters and options of

the virtual keypad available in the DLOADX program can be programmed as follows:

 keypad: by using the functions available in the DLOADX RS submenu (SERVICE MODE

STRUCTURE HARDWARE LCD KEYPADS SETTINGS DLOADX RS);

 DLOADX program: by clicking on the "DloadX (RS-232)" item ("Structure" window

"Hardware" tab "Keypads" item "DloadX (RS-232)" item).

Settings of the virtual keypad available in the GUARDX program, web browser or mobile

phone are programmable:

 keypad: by using the functions available in the GUARDX ADDR. submenu (SERVICE MODE

STRUCTURE HARDWARE LCD KEYPADS SETTINGS GUARDX ADDR. N (n = module

address)];

 D

LOADX program: by clicking on the "GuardX/MobileKPD" item ("Structure" window

"Hardware" tab  "Keypads" item "GuardX/MobileKPD" item – see Fig. 6).

For description of the keypad parameters and options please refer to the programming

manual for the INTEGRA / INTEGRA Plus control panel (only some of these parameters and

options are available for the virtual keypad).

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

No comments

Satel INTEGRA Plus Specifications Page 11