Satel INTEGRA Plus Specifications download pdf (Page 17)

SATEL ETHM-1 Plus 15

Change – click on the button to save the changes to the command parameters which were

made after adding the command to the list (otherwise, the changes made will not be

saved).

Delete – click on the button to remove the highlighted command from the list.

Fig. 10. D

LOADX program: "Definitions" tab.

Command – function executed by the control panel, which can be assigned to the macro

command. To display the list of all available functions, click on the

button. Depending

on which function you have selected:

Arming – highlight the partitions which are to be armed (double-click on the field

designated by the partition number) and define the arming mode (next clicks on the field

designated by the partition number; the digit inside the field has the following meaning:

0 - fully armed; 1 – fully armed+bypasses; 2 – armed without interior; 3 - armed without

interior and without entry delay).

Disarming – highlight the partitions which are to be disarmed (double-click on the field

designated by the partition number).

Alarm clearing – highlight the partitions in which alarm is to be cleared (double-click on

the field designated by the partition number).

Bypass zones – highlight the zones which are to be inhibited (double-click on the field

designated by the zone number).

Unbypass zones – highlight the zones which are to be unbypassed (double-click on the

field designated by the zone number).

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 26 27

No comments

Satel INTEGRA Plus Specifications Page 17